
Micro sensor switch uses a professional 5.8GHz radar module to transmit CW radio waves at a fixed frequency of 5.8GHz±75Mhz to the induction area through a high-gain low-sidlobe planar microstrip antenna, and receives all the reflected radio waves in the area, which is converted by the mixing circuit of the module into a difference frequency electrical signal;According to the principle of Doppler effect, the high performance digital signal recognition algorithm is used to analyze whether there is a moving target in the region, so as to control the load power switch.
Micro sensor switch can be widely used in lighting, security, home, home appliances, IOT devices and other products that need to detect the human body’s movement, to add intelligent sensing function for the device, to bring the user a superior sensory experience.
Motion detection
Detects movements such as walking, trotting, running, spinning, jumping, etc.
Product feature
★Strong interference suppression ability
Can avoid the same frequency interference, support intensive use;A variety of digital signal processing algorithms can suppress power frequency clutter and high-order harmonic interference, burst interference, and effectively filter some curtains, fans, air conditioners and other interferences.
★Flexible parameter configuration
The DIP switch can be used to flexibly configure parameters such as sensing distance, output delay time, and light sense, facilitating on-site testing and adapting to different application scenarios.
★ High performance antenna
The optimally designed planar microstrip antenna has the characteristics of high gain, low sidelobe and less backward radiation.
★ High reliability
High sensitivity and reliability of sensing target;Good consistency in mass production.
★Strong penetration
It can penetrate glass, plastic, clothes, quilts, ceramics, thin wood and other materials.
★ Not affected by the environment
Not affected by snow, haze, temperature and humidity, dust, light, noise and other environmental effects.

|
Parameter item |
Min value | Typical value | Max value | Unit | Description | |
| System parameter |
Output Power |
-4 | dbm | Pt | ||
|
Beam Angle |
120×120 | ° | @-3dB | |||
|
Operating frequency |
5725 | 5875 | MHz | ISM | ||
| Function
parameter
|
Motion sensing distance |
6 |
8 |
10 |
m |
Wall mounted: related to distance/sensitivity configuration |
|
Induction radius |
3 | 5 | m |
Top mount: 3m height/ Distance/sensitivity configuration dependent |
||
| Delay time | 5 | 300 | s | Hardware adjustable | ||
| luminous sensitivity threshold | 0 | 50 | Lux | Hardware adjustable | ||
| working conditions | Working voltage | 200 | 220 | 240 | V | |
| Rated power | 400 | W | Inductive load | |||
| 800 | W | Resistive load | ||||
| Standby power consumption | 0.35 | 0.5 | W | |||
| Working Temperature | -25 | 85 | ℃ | |||
| Storage Temperature | -40 | 125 | ℃ | |||
| Operating humidity | 5 | 95 | %RH | |||
1. Antennae radiation:
The front of the radar switch antenna should avoid metal objects (including the shell), there can be plastic, glass, wood and other penetrable occluder, but the occluder should not be close to the antenna, so as not to affect the resonance, radiation capacity or shielded signal. In addition, the larger the ground plane provided by the application floor to the radar switch, the less backward radiation, and more energy will be radiated from the antenna directly in front of it.
2. Other moving objects interfere:
Try to avoid pointing the radar switch at moving/shaking objects such as large metal equipment, ventilation pipes, fire pipes, and drainage pipes. Because it is possible that their motion Doppler frequency falls into the motion frequency of the person, causing a false positive. Some customized versions can solve the problem of fixed interference sources (such as electric fans, air conditioners, bath bullies and other interference).
3. Multiswitch installation:
When installing multiple radar switches, try to ensure that the antennas of each radar switch are parallel to each other, irradiated in the same direction or in the opposite direction, avoid the direct irradiation of each switch, and maintain a distance of more than 1m between the switches.
4. Power frequency and harmonic interference:
The radar switch has done a variety of power frequency interference and multiple harmonic suppression algorithms, but it is still recommended to stay away from high-voltage AC power supply, rectifier bridge, high-power electrical driver and other circuits, and do a good job of voltage regulation, shielding, power integrity and other design, so as to avoid super power frequency interference, beyond the range of switch suppression ability, causing false positives.
5. Optical interference:
The luminous change of the light-emitting component may cause the light intensity detected by the light-sensing device to change too much, causing the switch to switch between the off detection and the on detection function, and the control signal is abnormal.It is recommended that the light sensing device on the radar switch be protected from direct or indirect light emitted by the light-emitting device during installation.This version of the radar switch uses a single light sensor to detect ambient light, and can use a combination of natural light detection sensors and multiple light sensors to avoid this problem.
6. Strong penetration:
Compared with 24GHz, 60GHz, 77GHz millimeter wave, 5.8GHz microwave has a stronger penetration ability, for thin wood, ceramic, glass, plastic can penetrate, but generally not easy to penetrate brick walls.
7. ESD protection:
Do not touch the antenna and circuit with your hands to avoid excessive human contact discharge and damage to the radar switch.
Layers: 2 layers
Board Thickness: 0.635mm ± 0.05mm
Substrate Material: 96% Silicon Nitride
Surface Finish: ENIG (Electroless Nickel Immersion Gold)
Thermal Conductivity of Insulating Layer: 85 W/m·K
Outer Copper Thickness: 200μm
Gold Thickness: ≥ 3μ”
Process Characteristics: AMB process
Layers: 2 layers
Board Thickness: 0.5 mm
Base Material: Aluminum Oxide
Copper Thickness: 100 μm
Process Feature: DPC (Direct Plated Copper) Process
Surface Finish: ENIG / Silver (2μ”)
Dimensions: 70 × 70 mm
Number of SMT lines: 7 high-speed SMT mating lines
SMT daily production capacity: more than 50 million points
Inspection equipment: X-RAY tester, first piece tester, AOI automatic optical tester, ICT tester, BGA rework station
Mounting speed: CHIP component mounting speed (optimal conditions) 0.036S/chip
Minimum package: 0201, accuracy up to +0.04mm
Minimum device accuracy: PLCC, QFP, BGA, CSP and other devices can be pasted, with pin spacing up to +0.04mm
IC-type placement accuracy: the mounting of ultra-PCB boards, flexible PCB boards, gold fingers, etc. has a high level, can be mounted/inserted/mixed TFT display driver boards, cell phone motherboards, battery protection circuits and other difficult products.
CPU: Dual Cortex-A72 + Quad Cortex-A53 big and small core CPU structure
GPU: Mali-T860 GPU
Memory: LPDDR4 default 4GB, maximum support 4GB
Built-in memory: EMMC FLASH 8GB/16G/32G optional (label 16GB)
USB port: 8 USB 2.0 1 USB3.0, 1 TYEPC
RS485: 1 RS485
Serial port: 3 serial ports (two default RS232, 1 default TTL)
Audio output: left and right dual channel output, support 4R*3W dual speakers
MIC input: 2 MIC input sockets
IR input: 1 IR input socket
Decoding: Support 1080P, 4K H.265 hard decoding
Play mode: Support multiple play modes such as release loop, timing, and insert
Layers: 2
Board Thickness: 0.5mm
Material: 96% Alumina
Surface Finish: 1μm Gold Plating
Thermal Conductivity of Insulation Layer: 180W
Outer Copper Thickness: 300μm
Process Characteristics: Ceramic Base
Number of SMT cable: 7 high-speed SMT patch supporting production lines
SMT daily capacity: more than 30 million points or more
Detective equipment: X-ray tester, the first tester, AOI automatic optical tester, ICT tester, BGA return restaurant
Paste speed: CHIP component sticker installation speed (best condition) 0.036S/piece
The minimum packaging: 0201, the accuracy can reach+0.04mm
Minimum device accuracy: Paste PLCC, QFP, BGA, CSP and other devices, the spacing of the foot can reach+0.04mm
IC-type patch accuracy: It has a high level of sticker ultra-PCB board, flexible PCB board, and gold finger. It can be installed/inserted/mixed TFT display drive board, mobile phone motherboard, battery protection circuit and other difficult products.